Nr.1 used and revised circular metallic silo, hot galvanized, adding new ferrules, having the following dimension:

Diameter mm. 4.500
Total height mt. 17,50
Nominal capacity cubic meters 100
Filtering surface: sqm 250
Overall dimenzion on the ground: mt.4,50x4,50


Silo will be complete with:

Nr.4 diam. mt.3,50 h. mt. 1.50 rings to contain wood chips;
Nr.1 door to enter the wood chips area;
Nr.2 diam. 3,50 mt. h. mt. 1,50 rings to contain filtering bags;
Nr.118 diam. mm. 250X2.700 mm. Filtering bags;
Nr.2 frames to sustain filters,
Nr.1 automatic shaker for filtering bags;
Nr.1 door to enter the filtering bags area;
Nr.1 ladder with protection to get on the filter’s roof;
Nr.8 fire proof shutters;
Nr.1 top cover;
Nr.1 top perimetrical protection;
Nr.1 set of union flanges
Nr.1 set of nuts and bolts
Nr.1 pipe to expel filtered air built according to UNI 1056 laws and little threaded pipes for samples.
Nr.4 sustaining legs
Nr.1 hopper with flange for extractor

4. Nr.1 used system to extract wood chips from the silo. It’s complete with:

Nr.1 4,0 Kw – 4 poli v.380.50 gear motor;
Nr.1 inclined and parallel to the silo’s bottom screw conveyor;
Nr.1 1,5 Kw dosing unit complete with level indicator and shutter;
Nr.1 set of nuts and bolts;
Nr.1 lateral discharging screw conveyor. The screw conveyor discharge into an open box and is complete with 3kw gear motor, steel shaft and spiral, supports and bearings, inlet and outlet mouths.
All the equipment are used



5. Nr.1 New electric panel to protect and control the above mentioned motors. It’s supplied in a IP 55 box with timer for shaker, start and stop buttons and general switch.